EMT Practice Test

1. Question Content...

---

Question1: Scenario: A Cirtix Administrator is configuring a new Authentication, Authorization and Auditing (AAA) virtual server, and the status is DOWN. The administrator has made the following configurations:
Add lbvserver lb_vsrv_www HTTP 10.107.149.229.80- persistenceType NONOE -cltTimeout 180- authn401 ON -authnVsName SAML_SP Bind vserver lb_vsrv_www_ssl Red_srv
Bind lb vserver lb_vsrv_www_ssl Blue_srv
Add authentication vserver SAML_SP SSL 10.107.149.230.443- AuthenticationDomain citrix.lab How can the administrator finish the installation to change the status of the virtual server to UP?

Question2: Scenario: IT administrators working from remote locations, need to connect securely to internal Windows servers to manage the servers.
Below are the connection requirements:
The remote client devices must be locked down, preventing installation of any additional software

Users must authenticate at NetScaler Gateway and NetScaler Gateway must perform Single Sign-on to

the Windows servers
Connection capabilities (for example, client drive mapping) must be controlled by NetScaler Gateway

Which connection method can a Citrix Administrator configure to meet these requirements?

Question3: Which mode does a Citrix Administrator need to configure in order to allow the NetScaler to forward any packets that are NOT destined for an IP address which is NOT configured on NetScaler?

Question4: Which type of policy can be applied to a NetScaler Gateway virtual server to limit access to XenDesktop resources, if the user device does NOT comply with the company's security requirements?

Question5: Scenario: A user is attempting to access a web server, which is load-balanced by the NetScaler using HTTPS. The user received the following message:
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?

Question6: Which NetScaler feature can a Citrix Administrator use to create a customer footer for a NetScaler Gateway login page?

Question7: Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once.
What upgrading flexibility does SDX provide in this scenario?

Question8: Which NetScaler feature can be utilized to reuse existing TCP connections?

Question9: Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes.
Which Access Control List (ACL) will help to accomplish this requirement?

Question10: A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available.
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?

Question11: While troubleshooting an SSL issue on one of the SSL-based virtual servers, a Citrix Administrator noticed that the data captured from the TCP dump was showing in plain text.
What could be the cause of this issue?

Question12: A Citrix Administrator needs to generate AppFlow data for internal ICA connections.
Which two connection methods could the administrator use to route internal ICA connections through NetScaler without modifying the existing network routing? (Choose two.)

Question13: Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator noticed several entity UP and entity DOWN messages.
To what are these messages related?

Question14: Scenario: A Citrix Administrator has given permissions to team members to access their own admin partition, so they can add resources for different departments and manage them without making changes to the default NetScaler partition and configuration.
One team member was trying to use the command-line interface to trouble an authentication issue and could NOT use aaad.debug. However, the team member has full permissions on the admin partition.
What can be the cause of this issue?

Question15: Scenario: A XenDesktop Administrator just updated a StoreFront server to the X1 Receiver portal theme.
The NetScaler Administrator would like to update the gateway to match StoreFront as closely as possible.
How can the NetScaler Administrator accomplish this with the least amount of administrative effort and without impacting connectivity through the gateway during the change?

Question16: What are two pre-requisites for configuring SmartAccess policies on a NetScaler Gateway virtual server?
(Choose two.)

Question17: Scenario: A Citrix Administrator needs to integrate LDAP for NetScaler system administration using the current Active Directory groups. The administrator created the group on the NetScaler, exactly matching the group name in LDAP.
What can the administrator add next to complete the configuration of the LDAP?

Question18: Scenario: A Citrix Administrator has made changes to the NetScaler, deleting parts of the configuration, and then saved the new configurations. The changes caused an outage which needs to be resolved as quickly as possible. There is no NetScaler backup.
What does the administrator need to do to recover the configuration quickly?

Question19: Which two components need to be configured for SmartAccess? (Choose two.)

Question20: A NetScaler with Unified Gateway combines _________ and ________ to provide access to websites and applications through a single URL. (Choose the correct option to complete the sentence.)

Question21: How can a Cirtix Administrator configure session policies for the Authentication, Authorization and Auditing Traffic Management (AAA-TM) sessions if the authentication virtual server is specified in a Unified Gateway setup?

Question22: Scenario: A NetScaler MPX appliance has become unresponsive while using the GUI. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?

Question23: Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair.
When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table.
What can the administrator configure to resolve this issue?

Question24: Scenario: A Citrix Administrator needs to add 10 new servers to an existing server farm. The new servers are configured to serve the same applications and connections and are twice the capacity of the existing servers. The administrator wants to ensure that they are being fully utilized. Currently in the environment, the default load-balancing method is being used.
To ensure that only the 10 new servers are receiving twice the connections of the old servers without changing the load balancing to the rest of the environment, the administrator needs to add a weight of
_________ to the services attached to the ________ servers. (Choose the correct option to complete the sentence.)

Question25: Scenario: A Citrix Administrator deployed a NetScaler in one-arm mode. Currently, the VLANs 20, 30 and
40 are tagged on the interface with the option of 'tagall' on the interface.
What is true regarding the VLANs, when 'tagall' is enabled on the interface?

Question26: Which two options should a Citrix Administrator consider when adding a secondary device in a high availability (HA) pair? (Choose two.)

Question27: A Citrix Administrator has deployed a new NetScaler MPX appliance in the demilitarized (DMZ) with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the NetScaler?

Question28: Which three Unified Gateway elements can be configured by the Unified Gateway Wizard? (Choose three.)

Question29: Scenario: A Citrix Administrator of a Linux environment needs to load-balance the web servers in an environment. However, due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator do to load-balance the web servers in this scenario?

Question30: Scenario: A Citrix Administrator is troubleshooting a NetScaler issue. The administrator goes to the command line and from the Shell, tails the ns.log to view the log in real time to find the issue. After a few minutes, the administrator noticed that the logs stopped scrolling and the issue was missed.
How can troubleshooting continue using the ns.log?

Question31: Which type of entity can a Citrix Administrator configure to support the use of an SSL rewrite policy?

Question32: A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information.
What can be causing this issue?

Question33: Scenario: A Citrix Administrator is deploying a NetScaler device and would like to add the NTP server to this appliance. Currently, the NTP service is configured at 192.168.55.54.
Which command-line interface command can the administrator use to complete this task?

Question34: After creating and correctly configuring a custom user monitor, from where do the monitor probes originate by default?

Question35: Which two items can a Citrix Administrator change when configuring a default portal theme? (Choose two.)

Question36: Which three pieces of information are required for a NetScaler Unified Gateway deployment? (Choose three.)

Question37: In which two ways can a Citrix Administrator configure SmartAccess? (Choose two.)

Question38: Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
-It is a multi-proxy environment behind the NetScaler.
-USIP mode is enabled and applied to the services.
-The session timeout is very short.
-All users connect from the same location.
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.)

Question39: Users are experiencing resets form the Intranet server website, which is load-balanced trough the NetScaler.
Which NetScaler tool can a Citrix Administrator use to troubleshoot the reset issue?

Question40: Which option is needed to configure the NetScaler Gateway to provide users with multiple logon options after successful authentication, if the users are connected through clientless access?

Question41: Scenario: A Citrix Administrator created a rewrite policy to add a custom footer for a NetScaler Gateway login page. However, the administrator is NOT able to see the changes on the login page.
Which step can the administrator perform next to see the changes on the login page?

Question42: Scenario: A Citrix Administrator is performing a disaster recovery test and decided to fail over the NetScaler high availability (HA) pair appliances. The administrator noticed that the failover is NOT working as expected in item text, and the Secondary NetScaler is NOT taking over as Primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue with the NetScalers?

Question43: A Citrix Administrator needs to utilize the client IP Address as the resource IP address for the NetScaler to server connections.
Which mode on the NetScaler will the administrator utilize to meet this requirement?

Question44: Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler.
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?

Question45: Scenario: A company has three departments with proprietary applications that need to be load-balanced on the NetScaler. The three department managers would like to use the same IP address to access their individual application, which would mean configuring three load-balanced virtual servers all using the same IP address.
How can a Citrix Administrator configure this on the NetScaler?

Question46: Scenario: A Citrix Administrator is performing a disaster recovery test and decided to fail over the NetScaler high availability (HA) pair appliances. The administrator noticed that the failover is NOT working as expected in item text, and the Secondary NetScaler is NOT taking over as Primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue with the NetScalers?

Question47: Which three services can the StoreFront monitor probe to determine the state of the StoreFront server?
(Choose three.)

Question48: Which NetScaler Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from 192.168.10.200?

Question49: A Citrix Administrator needs to configure single sign-on to a StoreFront server using an external, secure single URL.
Which type of virtual server can the administrator use to meet this requirement?

Question50: Which NetScaler hardware or software platform offers a Multi-Tenant solution?

Question51: A Citrix Administrator needs to configure a setup with a single URL so that users can log on once and achieve seamless single sign-on to the NetScaler Gateway virtual server and web application being load- balanced on the NetScaler.
Which type of virtual server can the administrator configure to fulfill this requirement?

Question52: Scenario: A Citrix Administrator created four session policies and applied them to the bind points below.
Policy A: Split tunnel ON priority 10 bound at the Virtual Server level

Policy B: Split tunnel OFF priority 20 bound at the Group level

Policy C: Split tunnel NOT configured priority 30 bound at the Global level

Policy D: Split tunnel ON priority 6 bound at the Group level

Which policy will take precedence?

Question53: Scenario: A Citrix Administrator is concerned about the amount of health checks the NetScaler is sending the back-end resources. The administrator would like to find a way to remove health checks from specific bound services.
How can the administrator accomplish this?

Question54: Scenario: A Citrix Administrator needs to implement an Application Delivery Controller (ADC) solution. The administrator needs the appliance to be able to grow with the increasing demand for bandwidth and performance.
Which NetScaler platform with the administrator choose to accommodate the increasing demand for bandwidth and performance?

Question55: Which reason would account for uneven user connections on a back-end server using the default load- balancing method?

Question56: Which three steps can a Citrix Administrator take to integrate an existing CERT-based authentication policy on an existing NetScaler Gateway platform? (Choose three.)

Question57: Which NetScaler mode is commonly referred to as 'inline mode'?

Question58: How can a Citrix Administrator provide two-factor authentication with tokens in a XenDesktop with NetScaler Gateway environment?

Question59: Scenario: A Citrix Administrator has a NetScaler SDX with four VPX instances configured. The SDX has a
10GB bandwidth license that has been configured with dedicated bandwidth of 2 GB for each instance.
However, the administrator found that three instances do NOT ever reach the bandwidth limit, while one instance reaches the limit and needs 1 GB more bandwidth to accommodate increased traffic requests.
What can the administrator change on the instance that requires more bandwidth, to meet traffic requirements?

Question60: Scenario: A NetScaler Gateway provides ICA Proxy to an internal XenDesktop site in an environment. The security team wants the Citrix Administrator to configure the NetScaler to block client drives if the client device fails a security scan.
Which NetScaler feature allows the administrator to satisfy the security team's requirements without making changes to the XenDesktop configuration?

Question61: Scenario: A Citrix Administrator is evaluating the following policies in an environment.

Which policy will take effect in the event of a policy conflict?

Question62: Scenario: A Citrix Administrator needs to create local user accounts for other administrators with limited privileges. The other administrators will need only:
-Read-only access
-The ability to enable and disable services and servers
Which built-in Command Policy permission level can the administrator use?